![]() ![]() If the above fixes cannot make your M.2 show up in your BIOS, try to change the boot priority to M.2. To some degree, a faulty boot order may prevent Windows from detecting your properly connected M.2 drive and loading the software. Tap on the menu next to PCI Express X4_3 Slot (Black) Bandwidth and click the “ M.2 mode” button.Īfter exiting, you can restart your PC and get into the BIOS to check your M.2 drive. Click the “ Advanced” settings tab > Onboard Devices Configuration. Restart your computer and get into the BIOS by pressing the “ F2” or “ Delete” key. Thus, it’s critical for you to check M.2 settings in BIOS to ensure everything runs smoothly. In some cases, the M.2 drive not showing up might be caused by incorrect BIOS settings. Check M.2 Settings in BIOSįor SSDs, modern motherboards and laptops usually have two M.2 SSD slots. Please confirm this operation and wait for the update process to complete. Then select the BIOS update file downloaded from the USB stick. ![]() In the BIOS interface, select the “ Update BIOS From Drive” option. Connect your USB drive to your PC and enter the BIOS interface. Load all the updated files into a USB flash drive and reboot your computer. Download the BIOS update file from the official website of your Windows PC’s motherboard manufacturer. Please don’t interrupt the update and avoid any power failure to damage the motherboard during the update. Updating the BIOS is a good method to accept and adapt to these changes. That’s one reason why your M.2 SSD was not detected in Windows 10/11. When you connect a modern device to your motherboard, an outdated BIOS might fail to recognize the new technology. Then reboot your PC to check whether your M.2 drive shows up or not. Remember to save these changes before exiting the BIOS. Go to the Security interface and click the “ Secure Boot” button. Restart your computer and press “ F2” or “ Delete” to enter the BIOS. At this point, you just need to set Secure Boot to Disabled. Some motherboards only have Secure Boot but not Secure Boot Control. Disable Secure Boot in BIOSĭeactivating Secure Boot in BIOS is another practical solution to fix your M.2 drive not showing up. Please disconnect your desktop or laptop computers from all connections first, then you are ready to reinstall your M.2 SSD drive. Sometimes, incorrect installation could lead to your M.2 drive not showing up in BIOS. After exiting the BIOS, reboot your PC to see if your M.2 drive is visible to you or not in the BIOS. After entering the BIOS, expand SATA Configuration and select Configure SATA as “ IDE” mode. Restart your computer and press “ F2” or “ Delete” to get into BIOS. If your M.2 drive not showing up in Windows 10/11, you’re supposed to check whether your M.2 drive is enabled in BIOS or not.
0 Comments
Leave a Reply. |